Desulphurization and Dust Removal Stainless Steel Spiral Nozzle

Desulphurization and Dust Removal Stainless Steel Spiral Nozzle Widely applies in the haze desulphurization, dust removal, exha

Desulphurization and Dust Removal Stainless Steel Spiral Nozzle

Stainless Steel Spiral NozzleSpiral nozzle is also called desulphurization nozzle and non-block nozzle, large flow-rate nozzle, and dust removal nozzle.Theory of the spiral nozzle:1.The spiral nozzle produced a series of concentric cone jet type. Same with the axial nozzle the exit and entrance of the spiral nozzle also in the same central axis. While, there are no fine tuning blade inside of the spiral nozzle compared with the axial nozzle. The difference is that the spiral nozzle itself was designed into a shape of spiral which diameter shrinking constantly. This kind of design can cut the flow of the liquid into two or more concentric spiral rings. One meter below the nozzle, the jet model on the section was composed by one or more concentric rings.  The size of the droplet formed by the spiral nozzle is similarly with the size of tangential nozzle of hollow cone jet type. While, the operating pressure of the spiral nozzle is higher than the hollow cone jet type. When facing with the same pressure the spiral nozzle is more suitable than the axial nozzle in a situation of higher liquid flow rate.2.After tangent and collision with the shrinking spiral the liquid (or slurry) would be changed into very small droplets which will jet out and form into mist. The streamline designed from the entrance to the exit in the nozzle's cavity would make the modulus of the obstacle into the lowest. The spiral nozzle was suit for various kinds of works in numerous industries such as chemical industry, environment protection, electricity and textile etc. The spiral nozzle is more widely used especially in the desulfurization and dust removal. At the same time, the spiral nozzle has been accepted by many users in the industry by it's characters like easy fogging, against block and it's resistance of durability and corrosion.YueBosi Electronic Technology Co., Ltd.'s 316L stainless steel nozzle performance characteristic:  1. 316L stainless steel nozzle (SPJT) is a kind of solid cone-shape or the hollow cone-shape atomization nozzle, 2.  The jet angle scope can be 60 degrees - 170 degrees, generally 120 degrees. Under 3 Palestinian pressures, the liquid discharge rate scope is from 5.5 L/min to 4140L/min, 3.  Widely applies in the haze desulphurization, dust removal, exhaust gas processing, wastewater disposal, the fireproofing, fire fighting, spraying cleaning and other fields.  4.  These compact nozzles have smooth flow paths, which can minimize the liquid blocking, so that the liquid in the pipeline of a given size reaches the maximum flow.5.  316 L stainless steel spiral nozzle can be installed or updated in the majority of the pipeline system. 6.  There are NPT or BSPT (male) threads nozzles available, 316 L stainless steel spiral nozzle generally for inch male thread specification, it can connect with threaded adapters to be female thread, if you need special processing, please contact YueBosi Electronic Technology Co. Ltd sellers. 7.  Usually, 1/4 inch to 4-inch nozzles can be separately made of various materials, such as brass, 316 L stainless steel castings, PVDF, 95 ceramic, silicon carbide, TEFLON PTFE or PVC. And 316L stainless steel castings, PVC, 95 ceramics, silicon carbide stock a large number. We promise that conventional products can be shipped freely. If the nozzles applied to the special areas, relevant material nozzles also can be supplied.8.  Users can choose any kind of 316L stainless steel nozzles voluntarily from our company. There are mirror polish processing nozzle and the sand blasting nozzles available, both of which are completely meet the national environmental protection standard. Application scope: exhaust gas desulfurization; gas cooling; evaporative cooling; washing and bleaching shower; dust removal, fire-fighting.

Spiral nozzle spraying picture

Thread size(INCH)	1/4	3/8	1/2	3/4	1	1-1/2	2	3	4
L(MM)	42	53	67	77	99	151	177	220	264

Representative application1. Power plant, burning coal project desulfurization and denitration.2. Air purification, air cooling and defoaming.3. Evaporation, cooling, and dust controlling.4. Wetting air by dust removing spray--environment protect.5. Pre-treatment requires for non-blocking spray.6. Air cooling.7. Exhaust gas cleaning.8. Fire fighting, fireproof.9. Steel and iron/ petrochemical industry dustproof application. Common connection pattern of spiral spray nozzle

Connect with Adjustable-ball, Can deflect to big around 45°-50°.	Can connect with stainless steel directly Can be welded with pipe directly.	Can link with hole connector installed rapidly, and not damage the pipe, as long as there is a hole on the pipe.	Flange connection, convenient installation. Especially important dimension nozzle.

Sand blast nozzle	Teflon(F4) spiral nozzle	PP spiral nozzle	Stainless Steel spiral nozzle

Application

Our office

Our factory

      

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v33/340508133_1/Desulphurization_and_Dust_Removal_Stainless_Steel_Spiral.jpg' , 'http://i01.i.aliimg.com/photo/v33/340508133_2/Desulphurization_and_Dust_Removal_Stainless_Steel_Spiral.jpg' , 'http://i01.i.aliimg.com/photo/v33/340508133_3/Desulphurization_and_Dust_Removal_Stainless_Steel_Spiral.jpg' , 'http://i01.i.aliimg.com/photo/v33/340508133_4/Desulphurization_and_Dust_Removal_Stainless_Steel_Spiral.jpg' , 'http://i01.i.aliimg.com/photo/v33/340508133_5/Desulphurization_and_Dust_Removal_Stainless_Steel_Spiral.jpg' , 'http://i01.i.aliimg.com/photo/v33/340508133_6/Desulphurization_and_Dust_Removal_Stainless_Steel_Spiral.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Desulphurization and Dust Removal Stainless Steel Spiral Nozzle