Product cooling and coating vee jet nozzle

Product cooling and coating vee jet nozzle application :cooling,coating Product cooling and coating vee jet nozzle(Pressure Principle External Mix)Spray angle: 80 °flow rate: 2.8 ~ 280L/hourMaterial: nickel plated brass,stainless steel SUS316,stainless steel SUS303, PVCStandard Ontology: fourAutomatic ontology: fourFeatures:

These set-ups are designed in order to have two different paths for air and liquid, and to eject them through different orifices,  so that the atomized spray is produced from their impact in the immediate surroundings of the orifices. It is possible therefore to atomize viscous liquids as well as any liquid which might originate a solid build up in the mixing chamber of an ordinary internal mix atomizer. In addition liquid and air pressure can  be  adjusted independently from each other, which allows for an easy steady state atomizer regulation.

The fan nozzle, which belongs to a  Pressure Principle External mixing type, the liquid must pass through the pressure delivered to the nozzle, the external mixing type nozzle and internal mixing nozzle, structure varied greatly, not only the inner nozzle without mixing chamber, liquid and compressed air have separate pipeline system, and liquid with the compressed air atomization nozzle is in outside, therefore, the higher viscosity, easy to crystallization, and containing a solid material suspended liquid, external mixing type nozzle, is absolutely the best choice.Typical application:flux sprayingsprayingspraying antirust agentProduct model:

1/4SUL2110(Ln XMW 5006/An XMW 4030)  

1/4SUT2111(Ln XMW 5006/An XMW 4031)    

1/4SUR2166(Ln XMW 5001/An XMW 4030)   

1/4SUV2172(Ln XMW 5001/An XMW 4031)   

1/4SUS2330(Ln XMW 5002/An XMW 4030)   

1/4SUV2331(Ln XMW 5002/An XMW 4031)   

1/4SUQ2520(Ln XMW 5007/An XMW 4032)    

1/4SUV2521(Ln XMW 5007/An XMW 4033)           

Product cooling and coating vee jet nozzle